Composition, Temperature and Frequency Dependent Magnetic, Dielectric and Electrical Properties of Magnesium-Zinc Ferrites

Polycrystalline spinel MgxZn0.3Cu0.7-2xFe2+xO4, where x = 0.10, 0.20, 0.25, 0.30 and 0.35 ferrites (hereafter abbreviated as Mg-Zn) have been prepared by conventional double sintering technique. The samples were sintered at 1250°C in air for 6 hours. Measurements have been done at temperature and frequency ranges of 0 - 350°C and 0 - 500 kHz, respectively. In this work, some extrinsic magnetic properties such as Curie temperature, initial permeability, loss factor, quality factor, dielectric constant and resistivity of the samples have been studied. The Curie temperature and loss tangent of the samples decreased with increase in Cu-content whereas permeability, Qfactor, resistivity and dielectric constant have been noticed to be increased with the increase in Cucontent. The decrease in Curie temperature related…