M. M. Alam, Abdullah M. Asiri, Md. Tamez Uddin, M. A. Islam et al.
Abstract Initially, low‐dimensional ternary nanoparticles of ZnO/Al 2 O 3 /Cr 2 O 3 were synthesized using reliable solvothermal process and successfully implemented to fabricate enzyme‐less selective glycine (Gly) sensor. The calibration curve was plotted from the linear relation of current versus ...
M. M. Alam, Mohammed M. Rahman, Md. Tamez Uddin, Abdullah M. Asiri et al.
Here, on-pot low-dimensional ZnO/NiO/Al2O3 nanoparticles (NPs) were synthesized by simple wet-chemical (co-precipitation) method and followed by the calcination at 500 °C into Muffle furnace. The details characterization of prepared NPs were executed using powder X-ray diffraction (XRD), X-ray photo...
M. M. Alam, Md. Tamez Uddin, Abdullah M. Asiri, Mohammed M. Rahman et al.
Here, the nanoparticles (NPs) of CdO/SnO2 were prepared by co-precipitation method in alkaline phase at low temperature. The characterization of CdO/SnO2 NPs were analyzed by X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FESEM), X-ray diffraction (XRD) and ener...
Mohammad Aktarul Islam Chowdhury, Md. Tamez Uddin, Mushfique Ahmed, Md Arman Ali et al.
Md. Tamez Uddin, Yasmin Sultana, M. A. Islam
In the present study, tin oxide (SnO2) nanoparticles were prepared by precipitation method using tin tetrachloride (SnCl4) as precursor and ammonia solution as precipitating agent followed by calcination at 400 ºC for 2 h. As-prepared SnO2 particles were characterized by X-ray diffraction (XRD) and ...
M. M. Alam, Mohammed M. Rahman, Md. Tamez Uddin, Abdullah M. Asiri et al.
In this approach, folic acid (FA) sensor was fabricated with wet-chemically prepared Fe2O3/NiO/Mn2O3 nanoparticles (NPs), which was coated on a glassy carbon electrode (GCE) in the form of thin layers to create the desired sensor. The synthesized NPs were characterized by X-ray photoelectron spectro...
M. M. Alam, Muhammad Zobayer Bin Mukhlish, Ayesha Tazrin, Nahida Akter Jui et al.
NCs was developed with significant analytical parameters for practical application in monitoring the environmental pollutants of CBZs for the safety of environmental fields on a large scale.
Md. Mostafizur Rahman, M. A. Islam, Md. Tamez Uddin
Abstract The resistance of three different types of masonry mortar, namely Portland cement mortar (CM), epoxy resin-based polymer CM (PCM) and polymer mortar (PM) to corrosive aqueous media have been presented in this study. Assessment was carried out on the basis of relative loss in mass and compre...
M. M. Alam, Md. Tamez Uddin, Abdullah M. Asiri, Mohammed M. Rahman et al.
In this methodology, the thiourea (TU) sensor was made-up by means of glassy carbon electrode (GCE) layered by the wet-chemically prepared binary SnO2/V2O5 nanomaterials (NMs). The existence of SnO2 and V2O5 in prepared spherical NPs were categorized by X-ray photoelectron spectroscopy (XPS), Field ...
Tanvir Ahmed, Warda Noor, O Faruk, Mithun Chandra Bhoumick et al.
Dye contaminated waste water possess serious threat to the goal of reaching sustainable environment. Bio adsorbents can be utilized very effectively in removing dye ingredient from wastewater due to their high kinetics and capacity. The study was focused on observing bio adsorbent (jackfruit leaf po...
M. M. Alam, Abdullah M. Asiri, Md. Tamez Uddin, Mohammed M. Rahman et al.
<italic>In situ</italic> fabrication of a sensitive electrochemical toluene sensor probe using wet-chemically prepared ternary ZnO/MgO/Cr<sub>2</sub>O<sub>3</sub> nanofiber (NF)-decorated glassy carbon electrode (GCE) with Nafion adhesive was the approach of this study.
M. A. I. Chowdhury, Md. Tamez Uddin, Mushfique Ahmed, Md Arman Ali et al.
Kaiser Hamid, Muhammad Zobayer Bin Mukhlish, Md. Tamez Uddin
/CdS NCs multiple times without substantial loss of activity evidenced their stability, thus paving the way for advancements in large-scale environmental remediation and other industrial applications.
Oindrila Das, Md. Tamez Uddin, Md. Mostafizur Rahman, Mitun Chandra Bhoumick
In this work, the heterostructure carbon supported tin/tin oxide (Sn/SnO2) photocatalysts has been developed. The target heterostructure was prepared by precipitation method followed by carbothermal reduction using tin tetrachloride (SnCl4) as precursor for SnO2, activated carbon as reducing agent, ...
Md. Nurnobi Islam, Zannatul Mumtarin Moushumy, Md. Rakibul Islam, Mohammad Imran Hossain et al.