BORRBangladesh Open Research Repository
SearchSubmitAboutContact
BORRResearch for a Better Bangladesh.
AboutSubmit PaperContactTermsPolicyGitHub

© 2026 Bangladesh Open Research Repository.

Filters

Sort By

Sort by relevanceSort by dateSort by citations
Year Range
to

Results for “"Dip Prakash Samajdar"”

16+ results

Deep Insights into the Coupled Optoelectronic and Photovoltaic Analysis of Lead-Free CsSnI<sub>3</sub> Perovskite-Based Solar Cell Using DFT Calculations and SCAPS-1D Simulations

Verified

M. Khalid Hossain, Gazi Farhan Ishraque Toki, Dip Prakash Samajdar, Muhammad Mushtaq et al.

Journal: ACS OmegaYear: 2023Citations: 307

CsSnI3 is considered to be a viable alternative to lead (Pb)-based perovskite solar cells (PSCs) due to its suitable optoelectronic properties. The photovoltaic (PV) potential of CsSnI3 has not yet been fully explored due to its inherent difficulties in realizing defect-free device construction owin...

Physical SciencesEngineeringElectrical and Electronic EngineeringOpen Access
Read Source

Design and Simulation of Cs<sub>2</sub>BiAgI<sub>6</sub> Double Perovskite Solar Cells with Different Electron Transport Layers for Efficiency Enhancement

Verified

M. Khalid Hossain, Dip Prakash Samajdar, Ranjit Chandra Das, A. A. Arnab et al.

Journal: Energy & FuelsYear: 2023Citations: 279

Lead-free Cs2BiAgI6 has garnered a lot of research interest recently due to its suitability as a potential absorber layer in the solar cell (SC) architecture owing to its low cost, good stability, and high efficiency. The main highlight of this research work includes the photovoltaic (PV) performanc...

Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source

Numerical Analysis in DFT and SCAPS-1D on the Influence of Different Charge Transport Layers of CsPbBr<sub>3</sub> Perovskite Solar Cells

Verified

M. Khalid Hossain, Mustafa K. A. Mohammed, Rahul Pandey, A. A. Arnab et al.

Journal: Energy & FuelsYear: 2023Citations: 269

The power conversion efficiency (PCE) of cesium lead halide (CsPbX3, X = l, Br, and Cl)-based all-inorganic perovskite solar cells (PSCs) is still struggling to compete with conventional organic–inorganic halide perovskites. A combined material and device-related analysis is much needed to understan...

Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source

Numerical simulation and optimization of a CsPbI<sub>3</sub>-based perovskite solar cell to enhance the power conversion efficiency

Verified

M. Khalid Hossain, Gazi Farhan Ishraque Toki, Intekhab Alam, Rahul Pandey et al.

Journal: New Journal of ChemistryYear: 2023Citations: 260

Herein, we used TiO 2 as the ETL and CBTS as the HTL in a CsPbI 3 -based PSC and optimized it using SCAPS-1D software, where the final optimization of the device gave a maximum PCE of 19.06%.

Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source

Achieving above 24% efficiency with non-toxic CsSnI<sub>3</sub> perovskite solar cells by harnessing the potential of the absorber and charge transport layers

Verified

M. Khalid Hossain, Md. Shihab Uddin, Gazi Farhan Ishraque Toki, Mustafa K. A. Mohammed et al.

Journal: RSC AdvancesYear: 2023Citations: 177

This study employs theoretical simulations to identify ways to improve the efficiency of CsSnI 3 -based perovskite solar cells with PCBM ETL. The optimized device with CFTS HTL with a structure of ITO/PCBM/CsSnI 3 /CFTS/Se shows the highest PCE of 24.73%.

Physical SciencesEngineeringElectrical and Electronic EngineeringOpen Access
Read Source

Photovoltaic Performance Investigation of Cs<sub>3</sub>Bi<sub>2</sub>I<sub>9</sub>-Based Perovskite Solar Cells with Various Charge Transport Channels Using DFT and SCAPS-1D Frameworks

Verified

M. Khalid Hossain, Gazi Farhan Ishraque Toki, Dip Prakash Samajdar, Mirza H. K. Rubel et al.

Journal: Energy & FuelsYear: 2023Citations: 164

Cs3Bi2I9 as a solar absorber material is a strong contender for lead-free perovskite solar cells (PSCs). The presence of bismuth (Bi) in Cs3Bi2I9 leads to the origin of interesting optoelectronic properties along with a suitable optical band gap and high absorption coefficient. However, further anal...

Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source

Harnessing the potential of CsPbBr<sub>3</sub>-based perovskite solar cells using efficient charge transport materials and global optimization

Verified

M. Khalid Hossain, Sagar Bhattarai, A. A. Arnab, Mustafa K. A. Mohammed et al.

Journal: RSC AdvancesYear: 2023Citations: 139

Here we have done SCAPS simulation for optimizing the performance of CsPbBr 3 -based PSC. We first optimized the BMC with HTL connected mode and then optimized the CsPbBr 3 , TiO 2 , &amp; CFTS layers' various parameters in both with-HTL and without-HTL modes.

Physical SciencesEngineeringElectrical and Electronic EngineeringOpen Access
Read Source

Optimization of the architecture of lead-free CsSnCl3-perovskite solar cells for enhancement of efficiency: A combination of SCAPS-1D and wxAMPS study

Verified

M. Khalid Hossain, Gazi Farhan Ishraque Toki, Abdul Kuddus, Mustafa K. A. Mohammed et al.

Journal: Materials Chemistry and PhysicsYear: 2023Citations: 125
Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source

Perovskite Solar Cells with Dual Light Absorber Layers for Performance Efficiency Exceeding 30%

Verified

Sagar Bhattarai, M. Khalid Hossain, Rahul Pandey, Jaya Madan et al.

Journal: Energy & FuelsYear: 2023Citations: 120

The present work represents a comparative modeling and performance optimization of three device configurations: ITO/ZnO/Cs2BiAgI6/Spiro-OMeTAD/Au, ITO/ZnO/CIGS/Spiro-OMeTAD/Au, and ITO/ZnO/Cs2BiAgI6/CIGS/Spiro-OMeTAD/Au. The concern of low light absorption by materials such as Cs2BiAgI6 and CIGS lim...

Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source

Design Insights into La<sub>2</sub>NiMnO<sub>6</sub>-Based Perovskite Solar Cells Employing Different Charge Transport Layers: DFT and SCAPS-1D Frameworks

Verified

M. Khalid Hossain, A. A. Arnab, Dip Prakash Samajdar, Mirza H. K. Rubel et al.

Journal: Energy & FuelsYear: 2023Citations: 119

Nontoxic and inorganic lead-free double perovskite La2NiMnO6 (LNMO) has achieved tremendous attention as an absorber layer of a solar cell (SC) structure due to its outstanding optoelectronic properties to support photovoltaic (PV) applications. In order to check the feasibility of LNMO as a potenti...

Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source

A comprehensive study of the optimization and comparison of cesium halide perovskite solar cells using ZnO and Cu<sub>2</sub>FeSnS<sub>4</sub> as charge transport layers

Verified

M. Khalid Hossain, Gazi Farhan Ishraque Toki, Jaya Madan, Rahul Pandey et al.

Journal: New Journal of ChemistryYear: 2023Citations: 100

A comparative analysis along with the optimization of various parameters for 8 different Cs-halide perovskite absorber-based solar cells is performed using a SCAPS-1D simulator, where ZnO and CFTS are proposed as ETL and HTL materials, respectively.

Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source

Enhancement of efficiency in CsSnI3 based perovskite solar cell by numerical modeling of graphene oxide as HTL and ZnMgO as ETL

Verified

Sagar Bhattarai, M. Khalid Hossain, Rahul Pandey, Jaya Madan et al.

Journal: HeliyonYear: 2024Citations: 68

Perovskite photovoltaics have an immense contribution toward the all-round development of the solar cell. Apart from the flexibility, stability, and high efficiency, more stress has been given to using lead-free as well as eco-friendly, inexpensive materials in the fabrication of PSC devices. The ut...

Physical SciencesEngineeringElectrical and Electronic EngineeringOpen Access
Read Source

Optimizing the performance of Cs2AgBiBr6 based solar cell through modification of electron and hole transport layers

Verified

Nikhil Shrivastav, Jaya Madan, Mustafa K. A. Mohammed, Ali K. Al-Mousoi et al.

Journal: Materials Today CommunicationsYear: 2023Citations: 64
Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source

Achieving 24.6 % efficiency in 2D perovskite solar cells: Bandgap tuning and MXene contact optimization in (BDA)(MA)n−1PbnI3n+1 structures

Verified

Shivani Gohri, Jaya Madan, Dip Prakash Samajdar, Sagar Bhattarai et al.

Journal: Chemical Physics LettersYear: 2024Citations: 44
Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source

Revealing the secrets of high performance lead-free CsSnCl3 based perovskite solar cell: A dive into DFT and SCAPS-1D numerical insights

Verified

Okba Saidani, Abderrahim Yousfi, Dip Prakash Samajdar, Xueqing Xu et al.

Journal: Solar Energy Materials and Solar CellsYear: 2024Citations: 43
Physical SciencesEngineeringElectrical and Electronic Engineering
Read Source
PreviousPage 1 of 2+Next