Kazi Md. Shorowordi, Tahar Laoui, A.S.M.A. Haseeb, Jean‐Pierre Célis et al.
Kazi Md. Shorowordi, A.S.M.A. Haseeb, Jean‐Pierre Célis
Kazi Md. Shorowordi, A.S.M.A. Haseeb, Jean‐Pierre Célis
A.S.M.A. Haseeb, Jean‐Pierre Célis, J.R. Roos
M.Z. Huq, Jean‐Pierre Célis
The effect of an oscillating normal force (fretting Mode II) on the degradation mechanism in an alumina versus a WC‐Co ball‐on‐flat contact is presented. A sinusoidal oscillation of the normal force at a fixed frequency and normal force amplitude was applied for different numbers of cycles. The evol...
A.S.M.A. Haseeb, Jean‐Pierre Célis, J.R. Roos
Abstract There has recently been a growing trend towards controlling the microstructure of materials at the nanometer level. Such ultrafine microstructure can provide unusual and interesting properties not attainable in conventional materials. This work describes an automated setup for the electroch...
Q. Ahsan, A.S.M.A. Haseeb, E. Haque, Jean‐Pierre Célis
Kazi Md. Shorowordi, Tahar Laoui, A.S.M.A. Haseeb, Jean‐Pierre Célis et al.
status: Published
Kazi Md. Shorowordi, A.S.M.A. Haseeb, Jean‐Pierre Célis
status: Published
Q. Ahsan, A.S.M.A. Haseeb, E. Haque, Jean‐Pierre Célis
Abstract This paper describes an investigation on the failure of a large leaded bronze bearing that supports a nine-ton roller of a plastic calendering machine. At the end of the normal service life of a good bearing, which lasted for seven years, a new bearing was installed. However the new one fai...
Jean‐Pierre Célis, A.S.M.A. Haseeb, J.R. Roos
SUMMARYElectrodeposition of Cu/Ni Compositionally Modulated Multilayers (CMM) has been attempted by the dual-plating bath technique. In a very simple set-up using a manual transfer of the substrate from one bath to another, multilayers with sublayer thicknesses of 100, 25 and 5 nm have been deposite...