Mohammad Salim Kaiser, S. H. Sabbir, M. S. Kabir, Mashiur Rahman Soummo et al.
Effect of Fe, Ni and Cr addition on the wear behavior of hyper-eutectic Al-Si automotive alloy has been studied. Dry sliding wear tests have been conducted using pin-on-disc wear testing machine under normal loads of 20N and constant sliding speed of 0.64 ms-1. Influence of Fe addition to the base a...
Md Insiat Islam Rabby, Md Wasi Uddin, N.M.S. Hassan, Maglub Al Nur et al.
Maglub Al Nur, Akib Abdullah Khan, Somlata Dev Sharma, Mohammad Salim Kaiser
The aim of this study is to investigate the electrochemical corrosion behavior of Al-Si automotive alloys with different levels of Si doping in 0.1 M NaCl solution at room temperature. The study was performed by electrochemical method, using potentiodynamic polarization and electrochemical impedance...
Ahmed Asif Razin, Dewan Sal-Sabil Ahammed, Maglub Al Nur, Mohammad Salim Kaiser
Al-based automotive alloys with different level of Si content has been conducted on the characterization of machined surfaces in terms of roughness, temperature, chips formation as well as microstructue evaluation under different machining conditions. For this experiment a shaper machine with HSS si...
Akib Abdullah Khan, Mohammad Salim Kaiser, Maglub Al Nur
Abstract The electrochemical corrosion activities of 2xxx series Al alloys were investigated in NaCl of 0.3 M, and 0.6 M concentrations and seawater environments. Both Tafel polarization and electrochemical impedance spectroscopy (EIS) methods were followed to analyze the corrosion behavior. These r...
Fahim Faisal Dip, Mahmudur Rashid, Rahat Mollick, Maglub Al Nur
Concerns about environmental pollution and global warming are increasing the demands on modern engines, which are expected to operate at high efficiency and at the same time have minimal emissions. Emission models to predict the level of engine exhaust gas have become increasingly important in the a...
Mohammad Salim Kaiser, Maglub Al Nur
Effect of Fe, Ni and Cr on the corrosion behaviour of hyper-eutectic Al-Si automotive alloy was studied. The test of corrosion behaviour at different environmental pH 1, 3, 5, 7, 9, 11 and 13 was performed using conventional gravimetric measurements and complemented by resistivity, optical micrograp...
Akib Abdullah Khan, Mohammad Salim Kaiser, Maglub Al Nur
Abstract The purpose of this study was to experimentally inspect the pollutant emission of a retrofitted SI engine using octane, compressed natural gas, and liquefied petroleum gas fuels operated at different speeds. The study was conducted using a retrofitted SI engine. The engine was coupled with ...
Sakıb Al Razı Khan, Mohammad Ashfaq Hossain, Maglub Al Nur, Mohammad Salim Kaiser
The electrochemical corrosion property of ternary Al and quaternary Zr added Bell metal in 0.1M Sodium Chloride solution has been experimentally conducted at room temperature. Electrochemical impedance spectroscopy (EIS) method and Potentiodynamic polarization technique are used to carry out the ele...
Maglub Al Nur, Mohammad Ali, A. M. Afsar
Sal-Sabil Ahammed, Asif Razin, Maglub Al-Nur, Salim Kaiser
This paper aims to investigate and compare the characteristics of machined surfaces and chips formation of aluminium-based automotive alloys with varying silicon content. The milling operations are performed using horizontal milling machine under two peripheral up milling and down milling methods wi...