K. Z. M. Abdul Motaleb, Md Shariful Islam, Mohammad Bellal Hoque
Pineapple leaf fiber (PALF) reinforced polypropylene (PP) composites were prepared by compression molding. The fiber content varied from 25% to 45% by weight. Water uptake percentages of the composites containing various wt% of fiber were measured. All the composites demonstrated lower water uptake ...
Mohammad Shahriar Kabir, Md. Sahadat Hossain, Monir Mia, Md. Nazru Islam et al.
Today we are facing a great problem due to the synthetic compounds, as most of them are not environmentally friendly. Natural fibers are the fibers which are obtained from the nature and these fibers are environment friendly. So the use of natural fiber is increasing day by day in different sectors....
Mohammad Bellal Hoque, Solaiman, Asraful Alam, Hasan Mahmud et al.
In this study, a fabric was manufactured consisting of 50% pineapple, 25% jute and 25% cotton fibers by weight, to make composites using polypropylene (PP) as a matrix material. We used compression molding technique, which kept 30% of the fabric content by total weight as the composite. The tensile ...
Mohammad Bellal Hoque, Md. Sahadat Hossain, Abdul M. Nahid, Solaiman Bari et al.
Pineapple Leaf Fiber (PALF)-reinforced polypropylene (PP) based composites were prepared successfully by conventional compression molding technique. Different percentages (25,30,35, 40 and 405% by weight) of fiber were used to prepare composites. Tensile Strength (TS), Tensile Modulus (TM), Elongati...
Mohammad Bellal Hoque, Masuma Jahan Tanjila, Md. Imran Hosen, Md. Abdul Hannan et al.
Mohammad Bellal Hoque, Abdul Hannan, M.Z.I. Mollah, M.R.I. Faruque et al.
Pineapple leaf fiber (PALF) reinforced epoxy resin-based composites were fabricated by using hand lay-up technique. The fiber content in the composites was taken as 25% (w/w), then it was modified by inserting 5% guar gum (polysaccharide) filler. Results demonstrated a 6% and 9% increase of tensile ...
Md. Mostafizur Rahman, Md. Shamsuzzaman, Dip Das, Md. Abdus Shahid et al.
Mohammad Bellal Hoque, Umma Ayman, Md. Sohan Sheikh, Abdul Hannan et al.
Tannins are naturally occurring polyphenolic compounds that are widely distributed in a variety of plant parts, such as leaves, bark, fruits, and seeds. This review provides a comprehensive analysis of tannins, with a particular focus on their classification, historical context, chemical structure, ...
Md Zillur Rahman, Md. Abdul Hannan, M.Z.I. Mollah, Mohammad Bellal Hoque et al.
, and hardness (69 D-shore). Moreover, these composites absorbed minimal water when a specific portion was submerged. The scanning electron microscopy (SEM) test on the composites revealed good fibre adhesion and adherence content between BGPF and okra fibres. Additionally, the thermo-gravimetric an...
Md. Mostafizur Rahman, Nur‐Us‐Shafa Mazumder, Umme Salma Ferdousi, Md. Abdus Shahid et al.
Mohammad Bellal Hoque, Md. Sahadat Hossain, Ruhul A. Khan
In this study, sugarcane bagasse fiber reinforced polypropylene based composites were fabricated successfully and their tensile, bending and water uptake behavior were studied. The composites were prepared by compression molding process. The fiber composition in the composites was 30% by weight. Res...
Mohammad Bellal Hoque, Md. Solaiman Bari, Ashiqun Nobi
Sugarcane bagasse fiber reinforced polypropylene (PP) based composites were prepared by compression molding. The fiber content was 40% by weight. Tensile strength (TS), tensile modulus (TM) and elongation break (Eb%) of the composites were found to be 51MPa, 1414 MPa and 14% respectively. The TS, TM...
Mohammad Bellal Hoque, Tanzim Hossain Oyshi, Badhon Baria, Masuma Jahan Tanjila et al.
Taro fiber, derived from the Colocasia esculenta plant, has gained attention as a sustainable alternative to synthetic and conventional natural fibers. This review explores extraction techniques, physicochemical properties, modifications, applications, and future directions of taro fiber. Taro fiber...
Badhon Baria, Md. Abdus Shahid, Aditi Misra, Mohammad Bellal Hoque et al.
The increasing demand for sustainable and efficient manufacturing in the ready-made garment (RMG) industry has driven interest in digital solutions. This review article explores the effect of 3D sampling technology (i.e., CLO 3D, Optitex, Lectra, and Browzwear) over traditional physical sampling on ...
Tamanna Hasan, Md. Sohan Sheikh, Md. Kamrul Hossain, Mohammad Bellal Hoque
: This review highlights the pressing environmental and sustainability challenges posed by solid waste management in the textile industry, a sector significantly contributing to global waste streams. By synthesizing current practices and innovations, the manuscript identifies critical gaps and futur...